Loading...
7-21
Status Screens
7.16. Network Port Status Screen
As shown in Figure 7.17, this screen lists parameters for the Modem Port.
Modem Port Parameters are selected via the Modem Port Configuration
Menu (Section 5.4.4.)
Communication Settings:
MAC Address: The Media Access Control Address.
IP Address: The VIP's IP Address.
Subnet Mask: The VIP's Subnet Mask.
Gateway: The VIP's Gateway Address.
SNMP Mgmt 1 Addr: IP address for SNMP Manager 1.
SNMP Mgmt 2 Addr: IP address for SNMP Manager 2.
SNMP Community: The user-defined SNMP Community.
General Parameters:
Command Echo: When enabled, commands sent to this port will
be echoed back to the polling device.
Response Type: Upon login, this port can either display the Main
Menu immediately, or wait until [Enter] is pressed.
"Sure" Prompt: When enabled, a prompt will be displayed before
certain irreversible commands are completed.
CMD Port Timeout: The Network Port timeout value.
PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:46 1% Full
NETWORK PORT: NIC Installed
COMMUNICATION SETTINGS OUTPUT PARAMETERS
MAC Address: 00-40-f4-6e-eb-a6 Output Mode: ASCII Record
IP Address: 192.168.168.168 Data on ^B01: On
Subnet Mask: 255.255.255.0 Hold “End Data”: On
Gateway: (undefined) Line # Tag: Off
SNMP Mgmt 1 Addr: (undefined) Send Compressed: Off
SNMP Mgmt 2 Addr: (undefined) Auto Delete: Off
SNMP Community: public
Send MSS: 1460 OUTPUT PARAMETERS (BINARY BLOCK)
Transmit Attempts: 3 Att/5 Secs
GENERAL PARAMETERS DLE Stuffing: Off
Command Echo: On
Response Type: Inhibit Menu
“Sure” Prompt: On
CMD Port Timeout: 15 Mins
Audit Trail: Off
ACTION PARAMETERS
Action Delay: 10 Secs
Press <Enter> to return to menu ...
Figure 7.17: Network Port Status Screen
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com