Loading...
7-17
Status Screens
7.14. Console Port Status Screen
As shown in Figure 7.15, this screen lists parameters for the Console Port.
Console Port Parameters are selected via the Console Port Configuration
Menu (Section 5.4.3.)
Communication Settings: Lists Baud Rate, Parity, Data Bits, Stop
Bits, and Handshake Mode for the Console Port.
General Parameters:
Command Echo: When enabled, commands sent to this port will
be echoed back to the polling device.
Response Type: Upon start up, this port can either display the
Main Menu, or withhold the Main Menu until [Enter] is pressed.
"Sure" Prompt: When enabled, a prompt will be displayed before
destructive commands are completed.
CMD Port Timeout: The Console Port timeout value.
Audit Trail: When enabled, the VIP will log command activity.
Action Parameters: The amount of time that will elapse between
alarm actions sent from this port.
PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:44 1% Full
CONSOLE PORT:
COMMUNICATION SETTINGS OUTPUT PARAMETERS
Com Settings: 9600,N,8,1,RTS Output Mode: ASCII Record
Data on ^B01: On
Hold “End Data”: On
Line # Tag: Off
Send Compressed: Off
Auto Delete: Off
OUTPUT PARAMETERS (BINARY BLOCK)
Transmit Attempts: 3 Att/5 Secs
GENERAL PARAMETERS DLE Stuffing: Off
Command Echo: On
Response Type: Inhibit Menu
“Sure” Prompt: On
CMD Port Timeout: 15 Mins
Audit Trail: Off
ACTION PARAMETERS
Action Delay: 10 Secs
Press <Enter> to return to menu ...
Figure 7.15: Console Port Status Screen
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com