Loading...
7-15
Status Screens
7.12. PBX Port Status Screens
These screens list parameters for the PBX Ports. There are separate
status screens for PBX Ports A and B. As described in Section 5.4.1, port
parameters are selected via the Port Configuration menus.
Note: NLJ-VIP units do not include PBX Port B.
Communication Settings: Lists Baud Rate, Parity, Data Bits, Stop
Bits, and Handshake Mode for this port.
Input Parameters: Selected input parameters for this port:
Time Date Stamp: When enabled, the VIP will insert a Long
Format or Short Format Time/Date Stamp at the beginning of each
record received via this port.
Serial Number Stamp: When enabled, a serial number will be
inserted at the beginning of each record received by this port.
Strip Non-Print: When enabled, the VIP will remove non-printable
characters from all records received via this port.
End Character: The selected End-of-Record character for
this port.
Alarm Filter: The Alarm Filter selected for this port.
Store Alarm Data: Indicates where the VIP will store alarm
records received via this port.
Data Filter: The Data Filter selected for this port.
PBX Inact Alarm: The On/Off status of the PBX Inactivity Alarm
for this port.
PollCat NetLink-VIP Version 1.06 11/08/2005 Tue 11:43 1% Full
PBX PORT A:
COMMUNICATION SETTINGS
Com Settings: 9600,E,7,1,None
INPUT PARAMETERS
Time/Date Stamp: Off
Serial # Stamp: Off
Strip Non-Print: On
End Character: ^J
Alarm Filter: None
Store Alarm Data: Alarm
Data Filter: None
PBX Inact Alarm: None
Press <Enter> to return to menu ...
Figure 7.13: PBX Port Status Screen (PBX Port A Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com