Loading...
5-7
Confi guration
13. Strip Non-Printables: Conserves memory by excluding characters
such as Nuls and Dels. (Default = On.)
14. End Character: Defines the End-of-Record (EOR) character that
the VIP expects to see at the end of each record received at this port.
(Default = ^J (Line Feed).)
15. Alarm Filter: Enables/disables the Alarm Filter and selects the Alarm
Filter Format for this port. The Alarm Filter monitors data, and
notifies the user when specific types of data are detected. For more
information, please refer to Section 9. (Default = Off.)
16. Store Alarm Data: Determines where the VIP will store alarm data
received via this port. Alarm Records can be stored in the Alarm File,
the Standard (non-alarm) File, or both files. For more information,
please refer to Section 16.1.1. (Default = Alarm.)
17. Data Filter: Enables/disables the Data Filter and selects the Data
Filter Format used by this port. The Data Filter conserves memory and
cuts polling time by excluding records not needed for your application.
For more information, please refer to Section 8. (Default = Off.)
18. PBX Inactivity Alarm: Enables/disables the PBX Inactivity Alarm
and selects the format for this port. The inactivity alarm monitors the
flow of data from the PBX and notifies the user if the flow stops. For
further instructions, please refer to Section 10. (Default = Off.)
Field Suppression:
31. Lucent Switch: This Item can be used to suppress the phone number
field in certain data records, as described in Section 5.4.1.1. This
feature is useful in countries that prohibit the transfer of phone number
records via network.
PBX PORT A:
COMMUNICATION SETTINGS INPUT PARAMETERS
1. Baud Rate: 9600 11. Time/Date Stmp: Off
2. Bits/Parity: 7-Even 12. Serial No Stmp: Off
3. Stop Bits: 1 13. Strip Non-Prnt: On
4. Handshake Mode: None 14. End Character: ^J
15. Alarm Filter: Off
16. Store Alm Data: Alarm
17. Data Filter: Off
18. PBX Inact Alm: Off
FIELD SUPPESSION
31. Lucent Switch
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.4: PBX Port Configuration Menu (Port A Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com