Loading...
5-4
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
5.3. Set System Parameters
The System Parameters menu (Figure 5.2) is used to set common
parameters, such as command mode Passwords and the Site ID Message.
To access the System Parameters menu, go to the Main Menu, type 23 and
press [Enter]. The following items can be configured via this menu:
1. Supervisor Password: Defines the Supervisor password. When
this password is entered at the Password Prompt, the VIP will start
up in Supervisor Mode, allowing access to all menu and command
functions. (Default = SUPER.)
2. User Password 1: Defines the first User Password. When entered
at the Password prompt, the VIP will start up in User Mode, allowing
limited access to menu and command functions. (Default = SMDR.)
3. User Password 2: Defines the second User Password. When entered
at the Password prompt, the VIP will start up in User Mode, allowing
limited access to menu and command functions.
(Default = undefined.)
4. Site ID Message: Defines a text string (up to 32 char.) that identifies
the location where the unit is installed. If this item is defined, the
Site ID will be displayed prior to the Command Prompt, each time
command mode is accessed. The Site ID can also be displayed via the
status screens (Main Menu, Item 1). (Default = undefined.)
Notes:
If the Site ID message begins with an underscore (_), the
message will be displayed after the command prompt. However,
the underscore character will not appear when the Site ID is
displayed.
If the Console Port Password is disabled (Sw7=Down), the Site
ID message will not be displayed when the unit is contacted via
the Console Port.
SYSTEM PARAMETERS:
1. Supervisor Password: (...)
2. User Password 1: SMDR
3. User Password 2: (undefined)
4. Site ID Msg: (undefined)
5. Wrap-Around: Off
6. Real-Time-Clock: 06/18/2004 Fri 16:39:05
7. Alm Data Wrap-Arnd: Off
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.2: System Parameters Menu
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com