Loading...
19-26
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
^B90 Reset Modem Port / Define Modem Port
Communication Parameters
(Supervisor Mode Only) This command can be used to reset the VIP's
internal modem or redefine modem communication parameters.
Reset Modem: To reset the modem, use the following format:
^B90 Reset Modem
^B90,Y Reset Modem, Suppress "Sure?" Prompt.
Configure Modem Port: To define modem communication parameters,
use the following format:
^B90,baud,parity,data,stop [Enter]
Where:
baud Baud Rate: Any standard rate from 300 bps to 115.2 Kbps.
It is only necessary to enter the first two characters of the
baud rate. If an asterisk is entered in this field, the port will
be set to the default modem port baud rate (57.6 Kbps).
parity Parity Bits: None (n), Odd (o), or Even (e)
data Data Bits: 7 or 8
stop Stop Bits: 1 or 2
Corresponding Menu Function: Modem Port Configuration Menu.
^B91 Console Port Communication Parameters
(Supervisor Mode Only) Defines the baud rate, parity, data bits, and stop
bits for the Console Port. This command uses the following format:
^B91,baud,parity,data,stop [Enter]
Where:
baud Baud Rate: Any standard rate from 300 bps to 115.2 Kbps.
Note that it is only necessary to enter the first two
characters of the baud rate. If an asterisk is entered in this
field, the port will be set at the default rate specified by
set-up switches 1, 2, and 3.
parity Parity Bits: None (n), Odd (o), or Even (e)
data Data Bits: 7 or 8
stop Stop Bits: 1 or 2
Corresponding Menu Function: Console Port Configuration Menu.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com