Loading...
19-20
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
^B66 Enable / Disable Time / Date Stamp
(Supervisor Mode Only) Enables the time/date stamp option for each input
port. The time/date stamp will be inserted at the beginning of each record,
prior to storage in the VIP's memory. This command uses the
following format:
^B66[,port][,action] [Enter]
Where:
,port Input Port: If this argument is omitted, ^B66 will enable or
disable the time/date stamp for PBX Port A. Offers the
following options:
,A PBX Port A (Default)
,B PBX Port B (not available on NLJ-VIP)
,X AUX Port (not available on NLJ-VIP)
,I PBX IP Port
,action Enable / Disable: Offers the following options:
,1 Disable Time/Date Stamp (Default)
,2 Enable Time/Date Stamp
,3 Enable Long Format Time/Date Stamp
Corresponding Menu Function: Port Configuration Menus, Item 11.
^B67 Set Auto Delete Option
(Supervisor Mode Only) When data is released to the polling device, the
Auto Delete option can automatically erase each data block from the VIP
memory after reception is acknowledged. Note that this command will only
effect the port that invoked the command.
Command Options:
^B67,1 Disable Auto Delete Option (Default)
^B67,2 Enable Auto Delete Option
Note: Before enabling the Auto Delete Option, please refer to the
cautions listed in Section 16.6 of this User's Guide.
Corresponding Menu Function: Port Configuration Menus, Item 26.
^B68 Set Command Echo
Enables / Disables the command echo function. When enabled, commands
sent to the VIP will be echoed back to the polling device. Note that this
command will only effect the port that invokes the command.
Command Options:
^B68,1 Disable Command Echo
^B68,2 Enable Command Echo (Default)
Corresponding Menu Function: Port Configuration Menus, Item 11.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com