PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
^B61 Define PBX Port Bits & Parity
(Supervisor Mode Only) Selects bits and parity settings for PBX Port A,
PBX Port B, and the AUX Port, using the following format:
^B61[,port][,set] [Enter]
,port Port: If this argument is omitted, ^B60 will set bits and
parity for the PBX Port A. Offers the following options:
,A Set Bits/Parity for PBX Port A
,B Set Bits/Parity for PBX Port B
(not available on NLJ-VIP)
,X Set Bits/Parity for the AUX Port
(not available on NLJ-VIP)
,set Bits/Parity Setting: Sets Bits and Parity for the selected
port. Offers the following options:
,1 7 Bits, Even Parity (Default)
,2 7 Bits, Odd Parity
,3 8 Bits, No Parity
,4 7 Bits, No Parity
Note: This command is included to maintain compatibility
with PollCat II units. If compatibility is not an issue, use the Port
Configuration Menus, or command ^B92 (PBX Port A,) ^B93 (PBX
Port B,) or ^B96 (AUX Port.)
Corresponding Menu Function: Input Port Configuration Menus, Item 2.
^B62 Select Output Format
Selects the format that will be used when data is released to the polling
device. Note that this command will only effect the port that invoked the
Command Options:
^B62,1 Release Data in ASCII Format (Default)
^B62,2 Release Data in ASCII Format
^B62,3 Release Data in Binary Block Format
^B62,4 Release Data in Xmodem Format
^B62,5 Release Data in Zmodem Format
Corresponding Menu Function: Port Configuration Menus, Item 21.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com