Loading...
16-26
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
FTP Server Example:
Figure 16.7 shows the commands and responses that might result when a
DOS FTP client connects to the VIP FTP Server, and retrieves a file named
"testXST". In Figure 16.8, note that all commands entered by the user
are shown in bold text.
1. In the first line of Figure 16.8, the user invokes the FTP command
at the DOS prompt, specifying the IP address for the VIP unit. Two
response messages are then displayed to acknowledge the connection,
and indicate that the server is ready.
2. The DOS FTP client then prompts for a username. The user keys in
the username "WTI" and presses [Enter]. The FTP server responds
with a message that verifies that the username was valid.
3. Next, the FTP client prompts the user to enter the password. The
user keys in the password and then presses [Enter]. The FTP server
then verifies that the Login was accepted. Note that the password is
not echoed back to the FTP client, and is therefore not shown in this
example.
c:\data\ ftp 192.168.168.168
Connected to 192.168.168.168.
220 NetLink FTP server ready.
User (192.168.100.236: (none)): WTI
331 User name okay, need password
Password:
230 Login accepted.
ftp> dir
200 PORT command successful.
150 Opening data connection.
File Records Status
testAST 1172 Locked
testAA1 990 Locked
testAA2 0 Free
testBST 1133 Locked
testBA1 706 Locked
testBA2 0 Free
testXST 1432 Free
testXA1 0 Free
testXA2 970 Free
226 Transfer complete.
ftp: 350 bytes received in 0.16 Seconds 2.19 Kbytes/sec.
ftp> get testXST
200 PORT command successful.
150 Opening data connection.
226 Transfer complete.
ftp: 107400 bytes received in 29.33 Seconds 3.66 Kbytes/sec.
ftp> bye
221 Goodbye
c:\data\
Figure 16.8: FTP Server Example
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com