Loading...
16-22
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
16.5. The FTP Server Feature
The FTP Server feature enables the VIP unit to function like a standard FTP
server. You can connect to the VIP using the FTP client program of your
choice, and then select and retrieve files. In order to use this feature, your
installation must include the following components:
A network connection to the VIP unit. Note that the network must be
running TCP/IP in order to use the VIP's FTP server function.
An FTP client (e.g. DOS FTP, WS FTP, etc.) installed on the remote
PC which will drive the data release.
16.5.1. Configuring the FTP Server Feature
To configure the FTP Server function, access command mode as described
in Section 19.1. From the Main Menu, type 28 and press [Enter] to
display the FTP Server Configuration menu (Figure 16.7.) This menu is
used to define parameters that will be employed when a user attempts
to create an FTP connection with the VIP unit. To define FTP Server
Parameters, key in the number for the desired item, press [Enter], then
follow the instructions in the submenus. The FTP Server Configuration
menu includes the following items:
FTP Server Parameters:
1. User Name: The name that a remote user will enter at their FTP
program's connect menu or prompt in order to create an FTP
connection to the VIP unit. (Up to 16 Characters;
Default = Undefined.)
2. Password: The password that a remote user will enter at their
FTP program's connect menu or prompt in order to create an FTP
connection to the VIP unit. (Up to 16 Characters;
Default = Undefined.)
FTP SERVER CONFIGURATION:
FTP SERVER PARAMETERS
1. UserName: MARIO
2. Password: ZEBRA
3. Filename: TST
4. Auto Delete: Off
5. Audit Trail: On
MISCELLANEOUS
11. Stop FTP Session
Enter selection,
Press <ESC> to return to previous menu ...
Figure 16.7: FTP Server Configuration Menu (Defaults Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com