PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
16.3.1. Command ^B00 (Set/Release Partition)
Command ^B00 can be used to set or release the partition prior to
beginning command driven data release.
• If the ^B00 command line does not include an argument, the
partition will be set to include all data by default.
• Although the ^B00 command line can include both the Data Type
and Source Port arguments, the Release partition argument (R)
cannot be combined with another argument.
Command ^B00 uses the following format:
^B00[,type][,source] or ^B00,R
,type Data Type: Offers the following options:
,D or ,STD (Standard Data) Records that did not
match an Alarm Filter Clue.
,A1 or A Records that matched a Clue for
Alarm Filter 1.
,A2 Records that matched a Clue for
Alarm Filter 2.
,ALM Records that matched Alarm Filter 1
and records that matched Alarm Filter 2.
(Not Speciﬁed) Include all data types.
,source Source Port: Offers the following options:
,PA Records received via PBX Port A.
,PB Records received via PBX Port B.
,PX Records received via AUX Port.
,PI Records received via the PBX IP Port.
(Not Speciﬁed) Records received from any of the three
,R Release the current data partition. Cannot be combined
with other ^B00 arguments.
^B00,D Set partition to include all records that did not match
an Alarm Clue, regardless of the Input Port that
^B00,A1,PX Set partition to include records that matched Alarm
Filter 1, and were received via the AUX Port.