PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
13.2.4. Numeric Page
When "Numeric Page" is selected, the VIP will contact one numeric pager
at a user deﬁned number.
Note: Modem Port communications parameters must be properly
deﬁned as described in Section 5.4.4.
The following item must be deﬁned at the conﬁguration menu for the
• Phone Number: Enter the number for your numeric pager.
Note: For Numeric Paging, the Phone Number prompt can specify
both the Pager phone number and a numeric "message". The phone
number and message are entered in the following format:
Where PHONENO is the pager phone number, and MESSAGENO
is any number that will notify the user when an alarm occurs. For
example, to dial 555-1212 and send the message "321", the phone
number would be deﬁned as "5551212@321#".
13.2.5. SNMP Trap
If this option is selected, the VIP will send an SNMP Trap to a user-deﬁned
IP address when an alarm is generated. The SNMP Trap can also include an
Note: Network Port parameters must ﬁrst be properly deﬁned as
described in Section 5.4.5. Make certain to specify IP Addresses for
the SNMP Manager(s) that will receive the trap.
When the SNMP Trap action is selected, the following items must be
deﬁned at the conﬁguration menu for the speciﬁed alarm:
• SNMP Management: Select one, both or none of the deﬁned SNMP
Managers. Note that IP addresses are deﬁned via the Network Port
• Message: (Optional) Enter a message to describe the type of alarm
event that occurred; for example "CHECK PBX".