Loading...
9-2
PollCat NetLink-VIP & PollCat NLJ-VIP - User’s Guide
9.2. The Alarm Configuration Menu
To set-up the Alarm Filters, you must first access the Alarm Configuration
Menu. In addition to defining the two Alarm Filters, the Alarm
Configuration Menu is also used to access submenus for the PBX Inactivity
Alarms, the 80% Full Alarm, and the Input Contact Alarm. The Alarm
Configuration Menu is only available in Supervisor Mode.
To access the Alarm Configuration Menu (Figure 9.1) from the Main Menu,
type 25 and press [Enter]. Items 1 through 6 provide access to submenus
for the various alarms. Item 7 selects default settings for the optional
output contacts. Items 8 through 17 define Default Alarm Filter Action
parameters.
9.2.1. Default Alarm Filter Actions
Alarm Action parameters determine how the VIP will react when an alarm
is generated. The Default Alarm Filter Actions select parameters that are
applied to all newly defined Alarm Clues. This allows the user to assign
identical actions to a series of clues without manually entering parameters
for each clue.
Notes:
Definition of the Default Alarm Filter Action parameters is
optional.
Default Alarm Action parameters are only applied to newly
defined clues. These defaults will not be applied to PBX
Inactivity Alarms, 80% Full Alarm, or Input Contact Alarm.
When new Alarm Clues are defined, the default values can be
altered or eliminated, as discussed in Section 9.5.1.
ALARM CONFIGURATION:
ALARMS DEFAULT ALARM FILTER ACTION
1. Alarm Filter 1 8. Action: None
2. Alarm Filter 2 9. Phone #: (undefined)
3. PBX Inactivity Alarm 1 (Cont.):
4. PBX Inactivity Alarm 2 10. Pager ID 1: (undefined)
5. 80% Full Alarm: Off 11. Pager ID 2: (undefined)
6. Input Contact Alarm: Off 12. Pager ID 3: (undefined)
13. SNMP Mgmt: Manager #1
OUTPUT CONTACTS (IDLE/NO ALARM) 14. Output Contacts
7. Contacts 1/2/3/4: C/C/C/C 1/2/3/4: -/-/-/-
15. Message: (undefined)
(Cont.):
(Cont.):
16. Auto Execute: Off
17. Execute Cmds: (undefined)
(Cont.):
(Cont.):
(Cont.):
18. Send Alm Records
19. Email to: Email #1
Enter selection,
Press <ESC> to return to previous menu ...
Figure 9.1: Alarm Configuration Menu
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com