IPS-400 / IPS-400-CE - User’s Guide
• Automated Mode: When enabled, the IPS will execute On, Off,
Boot, and exit commands without displaying a conﬁrmation prompt,
status screen or conﬁrmation messages. For more information, please
refer to Section 6.4. (Default = Off.)
Note: When this option is enabled, security functions are
suppressed, and users are able to access System Level menus and
control plugs without entering a password. If security is a concern
and the Automated Mode is required, it is recommended to use the
IP Security feature (Section 220.127.116.11) to restrict access.
• Manual Switch Button: Enables and conﬁgures the Default Button’s
manual plug control function, but does not effect the Default Button’s
ability to reset parameters to default values. (Default = "On".)
□ Off: Disables the manual plug control function.
□ On: Enables manual plug control. When Default is pressed and
held for three seconds, all outlets will be toggled On or Off.
• Command Prompt: Allows the Text Interface command prompt to be
set to either "IPS", "NPS", or "NBB." (Default = IPS.)