Loading...
A. Serial Interface
Notes:
1. To force the CTS line high, place Option Setup Switch 9 in the Down position as
described in Section 3.1.2.4.
2. To force the DCD line high, place Option Setup Switch 10 in the Down position as
described in Section 3.1.2.4.
3. Always high; supplied by CAS-41A.
4. Control Port pin 4 follows pins 4 or 20 of the selected port. See Section 4.3 for
instructions on selecting
pin 4 or 20.
Apx-1
Figure A.1: CAS-41A Serial Interface Block Diagram
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com