Loading...
7-11
Status Screens
Action Parameters: The Action Delay lists the amount of time that will
elapse between actions sent out via this port.
Output Parameters:
Output Mode: The format used when data is released via this port.
Data on ^B01: When disabled, ^B02 is sent to begin data release.
Hold End Data: When enabled, ^B02 is sent to release the "End
Data" message.
Line # Tag: The current status of the Line Number Tag feature.
Send Compressed: When enabled, this port will release data in space
compressed format.
Auto Delete: The current status of the Auto Delete feature at this port.
Servers and Clients:
Telnet Access: When disabled, you will not be able to establish a
Telnet session with the NetLink II.
SSH Access: When disabled, you will not be able to establish an SSH
connection with the NetLink II.
SYSLOG IP Address: The IP Address for the SYSLOG Daemon that
will receive Audit Trail records generated by the NetLink II.
SNMP Access: The current status of the SNMP Polling function.
SNMP Trap: The current status of the SNMP Trap feature.
TACACS: The enabled/disabled status of the TACACS feature.
RADIUS: The enabled/disabled status of the RADIUS feature.
PollCat NetLink II Version 2.0 02/16/2006 Thu 14:15 0% Full
NETWORK PORT:
COMMUNICATION SETTINGS OUTPUT PARAMETERS
MAC Address: 00-10-ec-80-6b-25 Output Mode: ASCII Record
IP Address: 192.168.168.168 Data on ^B01: On
Subnet Mask: 255.255.255.0 Hold “End Data”: On
Gateway: (undefined) Line # Tag: Off
DHCP: Off Send Compressed: Off
IP Security: Off Auto Delete: Off
SERVERS AND CLIENTS
GENERAL PARAMETERS Telnet Access: Off
Command Echo: On SSH Access: On
Response Type: Inhibit Menu SYSLOG IP Addr: (undefined)
“Sure” Prompt: On SNMP Access: Off
CMD Port Timeout: 15 Mins SNMP Trap: Off
Audit Trail: Off TACACS: Off
RADIUS: Off
ACTION PARAMETERS
Action Delay: 10 Secs
Press <Enter> to return to menu ...
Figure 7.10: Network Port Status Screen
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com