Status Screens
7.2. File List Screen
As shown in Figure 7.3, this screen shows a breakdown of the types of
records stored in buffer memory. Records are listed according to Data Type
and Receiving Port. There are three Data Types; Standard (Non-Alarm),
Alarm Filter 1, and Alarm Filter 2. There are two Receiving Ports; the
Serial PBX Port (PBX) and the PBX IP Port (PBX-I.) When Data Type
and Receiving Port are combined, this provides six possible file types. For
more information, please refer to Section 15.1.1.
The File List includes the following information:
Port: The Input Port (Serial PBX Port or PBX IP Port) that received
the records.
Data Type: The type of record is listed as follows:
Standard: (Non-Alarm) Records that did not match an Alarm Clue.
Alarm Filter 1: Records that match any Clue from Alarm Filter 1.
Alarm Filter 2: Records that match any Clue from Alarm Filter 2.
Total Record Count: The total number of records of this type,
including records that may have been stored outside of the current
partition after the partition was set.
Partition Record Count: The number of records in this partition.
Partition Owner: The name of the command port (Console Port,
Modem Port, or Net Port) or FTP Function that owns the partition for
this type of record. When data is released, each command port or FTP
Function is temporarily designated as "owner" of a specific type of
record. For example, the Console port may own all records received
via PBX Port A, or the Modem Port may own all records that match a
clue for Alarm Filter 1.
PollCat NetLink II Version 2.0 02/16/2006 Thu 22:31 0% Full
Port Data Type Total Record Ct Partition Record Ct Partition Owner
PBX Standard 574 552 None
PBX Alarm 1 144 143 None
PBX Alarm 2 212 209 None
PBX-I Standard 642 603 None
PBX-I Alarm 1 76 76 None
PBX-I Alarm 2 24 24 None
Press <Enter> to return to menu ...
Figure 7.3: File List (Sample Values Shown)
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com