Loading...
5-25
Confi guration
5.4.5. Network Port Configuration
Settings for network parameters, such as the IP Address and Subnet Mask,
will be determined by your network configuration. Please contact your
network administrator for appropriate settings, then assign parameters
as described in this section. The Network Port Configuration Menu
(Figure 5.13) offers the following options:
Note: Network parameters cannot be changed while a network
connection is in progress.
Communication Settings:
1. IP Address: NetLink II's IP Address (Default = 192.168.168.168.)
2. Subnet Mask: (Default = 255.255.255.0.)
3. Gateway Address: (Default = undefined.)
4. DHCP: Enables and configures Dynamic Host Configuration
Protocol. When this option is enabled and properly configured,
NetLink II will perform a DHCP request. Note that the MAC address
for the NetLink II is listed on the Network Status Screen.
(Default = Off.)
Note: Before configuring this feature, make certain that your
DHCP server is set up to assign a known, fixed IP address. You
will need this new IP address in order to reestablish a network
connection with the NetLink II unit.
NETWORK PORT:
COMMUNICATION SETTINGS OUTPUT PARAMETERS
1. IP Address: 192.168.168.168 21. Output Mode: ASCII Record
2. Subnet Mask: 255.255.255.0 22. Data on ^B01: On
3. Gateway Addr: (undefined) 23. Hold End Data: On
4. DHCP: Off 24. Line # Tag: Off
5. IP Security: Off 25. Send Compress: Off
26. Auto Delete: Off
SERVERS AND CLIENTS
31. Telnet Access: Off
GENERAL PARAMETERS 32. SSH Access: On
11. Command Echo: On 33. SYSLOG IP Addr: (undefined)
12. Response Type: Inhibit Menu 34. SNMP Access: Off
13. “Sure” Prompt: On 35. SNMP Trap: Off
14. CMD Timeout: 15 Mins 36. TACACS: Off
15. Audit Trail: Off 37. RADIUS: Off
38. Email/Txt Msg
ACTION PARAMETERS 39. PPP Dialout Off
16. Action Delay: 10 Secs
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.13: Network Configuration Menu
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com