Loading...
5-20
PollCat NetLink II - User’s Guide
5.4.4. Modem Port Configuration
To configure the Modem Port, go to the Port Configuration Menu (Main
Menu, item 22), type 22 and press [Enter]. The configuration menu shown
in Figure 5.12 will appear. The following options are available:
Communication Settings:
1. Baud Rate: Selects the baud rate for the Console Port. Any standard
rate from 1200 bps to 115.2K bps. (Default = 57600.)
2. Data Bits: Selects 7 or 8 Data Bits. (Default = 8.)
3. Parity: Selects Even, Odd, or No Parity. (Default = None.)
4. Stop Bits: Selects 1 or 2 stop bits. (Default = 1.)
5. Handshake Mode: Selects flow control for the PBX Input Port;
XON/XOFF, RTS/CTS, both, or None. (Default = None.)
6. Modem Strings: Sets the Modem Reset String, Modem Initialization
String and Hang-up String as described below.
1. Modem Reset String: Type 1, press [Enter], and then key in
the desired string in the resulting submenu. (Up to 16 Characters,
Default = ATZ.)
2. Initialization String: Type 2, press [Enter], and then key in the
desired string in the resulting submenu. (Up to 32 Characters,
Default = ATE0M0Q1&C1&D2S0=1.)
MODEM PORT: Modem Installed
COMMUNICATION SETTINGS OUTPUT PARAMETERS
1. Baud Rate: 57600 21. Output Mode: ASCII Record
2. Data Bits: 8 22. Data on ^B01: On
3. Parity: None 23. Hold End Data: On
4. Stop Bits: 1 24. Line # Tag: Off
5. Handshake Mode: None 25. Send Compress: Off
6. MODEM Strings 26. Auto Delete: Off
7. Reset Modem
CALLOUT PARAMETERS
31. Dial Attempts: 3
GENERAL PARAMETERS 32. Sequence Att: 3
11. Command Echo: On 33. Sequence Delay: 10 Mins
12. Response Type: Inhibit Menu 34. Imm Callout: Off
13. “Sure” Prompt: On 35. Imm Phone #: (undefined)
14. CMD Timeout: 15 Mins (Cont.):
15. Audit Trail: Off 36. Dialback Scrty: DB with Pswd
ACTION PARAMETERS
16. Action Delay: 300 Secs
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.12: Modem Port Configuration Menu
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com