Loading...
5-12
PollCat NetLink II - User’s Guide
13. Strip Non-Printables: Conserves memory by excluding characters
such as Nuls and Dels. (Default = On.)
14. End Character: Defines the End-of-Record (EOR) character that
NetLink II expects to see at the end of each record received at this
port. (Default = ^J (Line Feed).)
15. Alarm Filter: Enables/disables the Alarm Filter and selects the Alarm
Filter for this port. The Alarm Filter monitors data, and notifies the
user when specific types of data are detected. For more information,
please refer to Section 9. (Default = Off.)
16. Store Alarm Data: Determines where NetLink II will store alarm
data received via this port. Alarm Records can be stored in the
Alarm File, the Standard (non-alarm) File, or both files. For more
information, please refer to Section 15.1.1. (Default = Both.)
17. Data Filter: Enables/disables the Data Filter and selects the Data
Filter used by this port. The Data Filter conserves memory and cuts
polling time by excluding records not needed for your application. For
more information, please refer to Section 8. (Default = Off.)
18. PBX Inactivity Alarm: Enables/disables the PBX Inactivity Alarm
and selects the format for this port. The inactivity alarm monitors the
flow of data from the PBX and notifies the user if the flow stops. For
further instructions, please refer to Section 10. (Default = Off.)
Field Suppression:
31. Lucent Switch: This Item can be used to suppress the phone number
field in certain data records, as described in Section 5.4.1.1. This
feature is useful in instances where local regulations prohibit the
transfer of phone number records via network.
PBX PORT:
COMMUNICATION SETTINGS INPUT PARAMETERS
1. Baud Rate: 9600 11. Time/Date Stmp: Off
2. Data Bits: 7 12. Serial No Stmp: Off
3. Parity: Even 13. Strip Non-Prnt: On
4. Stop Bits: 1 14. End Character: ^J
5. Handshake Mode: None 15. Alarm Filter: Off
16. Store Alm Data: Both
17. Data Filter: Off
18. PBX Inact Alm: Off
FIELD SUPPESSION
31. Lucent Switch
Enter selection,
Press <ESC> to return to previous menu ...
Figure 5.8: PBX Port Configuration Menu
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com