Loading...
5-2
PollCat NetLink II - User’s Guide
1. Local Access: To communicate with the NetLink II via the Console
Port, first start your communications program (e.g., Tera Term Pro©.)
a) If Set-Up Switch 1 is UP (enable Console Port Password), the
system will display a login/password prompt.
b) Key in the login name and press [Enter], and then key in the
password and press [Enter]. The Default Administrator Login
name and Password are both "SUPER" (all uppercase, no quotes.)
2. Access Via Modem: Start your communications program
(e.g., Tera Term Pro©) and dial the NetLink II unit.
a) After the carrier is detected, the system will display a login/
password prompt.
b) Key in the login name and press [Enter], then key in the
password and press [Enter]. The Default Administrator Login
name and Password are both "SUPER" (all uppercase, no quotes.)
3. Access via Network: Before you can communicate with the
NetLink II via network, you must first access command mode via the
Console Port or Modem, and set network parameters as follows:
a) Access Command Mode: Access command mode via Console
Port or Modem as described above. When the READY message
appears, press [Enter] to display the main menu.
b) Configure the Network Port: Refer to Section 5.4.5, and then
set network parameters as follows:
IP Address: Type 1 and press [Enter].
(Default = 192.168.168.168)
Subnet Mask: Type 2 and press [Enter].
(Default = 255.255.255.0)
Gateway Address: Type 3 and press [Enter] (If needed.)
(Default = undefined.)
Telnet Access: Type 31 and press [Enter] to display the
Telnet Access menu, then type 1 and press [Enter] to enable
Telnet Access.
Note: Consult your network administrator to determine settings
for the IP Address, Subnet Mask, and Gateway Address.
c) Save Configuration Parameters and Exit Command Mode:
From the main menu, type 7 and press [Enter] to save the
network parameters entered above. After parameters have been
saved, type 8 and press [Enter] to exit command mode.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com