Loading...
17-21
Command Reference Guide
^B70 Enable/Disable Immediate Callout
and 80% Full Alarm
(Administrator Mode Only) Enables and configures the Immediate
Callout and 80% Full Alarm. When Immediate Callout is enabled,
NetLink II will dial a user-defined Callout Number, approximately 5
seconds after a disconnect or loss of carrier. Note that the Immediate
Callout feature must be enabled prior to each use.
When the 80% Full Alarm is enabled, NetLink II can perform any of the
standard Alarm Actions when internal memory becomes 80% full. For
more information, please refer to Section 11.
Command Options:
^B70 Disable Immediate Callout and 80% Full Alarm
^B70,I,1,1 Enable Immediate Callout
^B70,I,1,2 Disable Immediate Callout
^B70,I,2,n Define Immediate Callout Number
(Where n= Desired Immediate Callout Number.)
^B70,I,2,[Space] Clear Immediate Callout Number.
^B70,%,1,1 Enable 80% Full Alarm.
^B70,%,1,2 Disable 80% Full Alarm.
^B70,%,2,x Define notification action; Where x is the desired
action and 1 = None, 2 = Callout, 3 = Alphanumeric
Page, 4 = Numeric Page, 5 = SNMP Trap,
6 = Output Contact Action, and 7 = Console Action.
^B70,%,3,n Define number for 80% Full Callout or Page
(Where n is the desired phone number.)
^B70,%,3,[Space] Clear 80% Full callout number.
^B70,%,4,PagerID Define Pager ID Number 1 for 80% Full Alarm.
^B70,%,4,[Space] Clear Pager ID Number 1.
^B70,%,5,PagerID Define Pager ID Number 2 for 80% Full Alarm.
^B70,%,5,[Space] Clear Pager ID Number 2.
^B70,%,6,PagerID Define Pager ID Number 3 for 80% Full Alarm.
^B70,%,6,[Space] Clear Pager ID Number 3.
^B70,%,7,message Define 80% Full Alarm Message. This message can
be sent when the alarm generates a Callout,
Alphanumeric Page, SNMP Trap or Console Action.
^B70,%,7,[Space] Clear 80% Full Alarm Message.
^B70,%,8,1 Enable Auto Execute Function for 80% Full Alarm.
^B70,%,8,2 Disable Auto Execute Function for 80% Full Alarm.
^B70,%,9,cmds Define the Auto Execute Command String for this
alarm. Where cmds is a series of ^Bxx commands,
with each command separated by a backslash
character followed by a forward slash (\/).
^B70,%,9,[Space] Clear Auto Execute Command String.
Corresponding Menu Function: Immediate Callout; Modem Port
Configuration Menu, Item 34. 80% Full Alarm; Alarm Configuration
Menu, Item 5.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com