Loading...
17-16
PollCat NetLink II - User’s Guide
^B56 Select Data Filters
(Administrator Mode Only) Determines which data filter will be used for
each input port. This command uses the following format:
^B56[,port]<,filter> [Enter]
Where:
,port Input Port: If this argument is omitted, ^B56 will assign
the selected filter to the Serial PBX Port. Options:
,A Serial PBX Port
,I PBX IP Port
,filter Data Filter: Selects or disables the Data Filter. The
following options are available:
,1 Disable Data Filter at Selected Port (Default)
,2 Assign Data Filter #1 to Selected Port
,3 Assign Data Filter #2 to Selected Port
Corresponding Menu Function: Serial PBX and PBX IP Port
Configuration Menus, Item 17.
^B57 Enable / Disable XON / XOFF Function
(Administrator Mode Only) Enables/Disables the XON/XOFF function
at the Serial PBX Port. NetLink II can send an XOFF when memory
becomes 98% full, and an XON when more data can be accepted.
Command Options:
^B57,1 Enable XON/XOFF at Serial PBX Port.
^B57,2 Disable XON/XOFF at Serial PBX Port. (Default)
CAUTION: Some PBX switches may lock up when XON/XOFF
is used. Other PBX switches will not respond to XON/XOFF
commands. Consult your PBX User's Guide before attempting
to employ this feature.
Corresponding Menu Function: Serial PBX Port Configuration Menu,
Item 5
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com