Loading...
16-10
PollCat NetLink II - User’s Guide
3. Reboot & Default (Keep SSH Keys): Reboots the NetLink II unit,
and sets all user-defined parameters to default values, except for the
SSH Keys. This allows you to easily establish an SSH connection to
the unit after the Reboot procedure is complete.
4. Reboot & Default (All Parameters): Reboots the NetLink II unit,
and sets all user defined parameters to default values. Note that after
this command is executed, you will not be able to contact the unit via
Telnet or SSH until the Network Port communication parameters and
SSH keys have been reset to appropriate values.
5. Default (Keep IP Parameters): Keeps currently defined Network
communications parameters, and resets all other options to default
values without rebooting the unit. This allows you to set the unit to
default parameters, without changing parameters that are required in
order to contact the unit via network. Note that this command is not
available if you are communicating with the NetLink II via modem.
6. Default (Keep SSH Keys): Keeps currently defined SSH keys,
and resets all other options to default values without rebooting the
unit. This allows you to communicate with the unit via SSH after
the Default procedure is complete, without the need to redefine the
SSH keys first. Note that this command is not available if you are
communicating with the NetLink II via modem.
7. Default (All Parameters): Resets all currently defined NetLink II
parameters to default values, including Network Communication
values and SSH Keys. Note that this command is not available if you
are communicating with the NetLink II via modem.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com