Buffer Functions (Polling)
15.3. Command Driven Data Release
Data can also be released by invoking Command ^B01. The ^B01
command line can include optional arguments which are used to release
specific types of data. These arguments are similar to the options offered
under the Set Read Session Parameters menu. The command driven
procedure consists of the following steps:
Note: Prior to reading data, the user must select output options
(Output Mode, Data on ^B01, etc.) for the port that will drive the
data release, as described in Section 5.4.
1. Release Data Partition: Use command ^B00 to release the current
partition for your port. At the command prompt type ^B00,R and
then press [Enter]. Other ^B00 command options are listed in
Section 15.3.1.
The Release Remote Partition function (Administrator Mode
Only) can also be used to access data that has been assigned to
another port. Please refer to command ^B76 in the Command
Reference Guide (Section 17.)
A remote partition cannot be released while another port is
reading data from that partition.
2. Begin Data Release: Invoke command ^B01 with the appropriate
arguments to release the desired data. Section 15.3.2 describes the
various arguments for command ^B01.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com