Loading...
14-2
PollCat NetLink II - User’s Guide
When parameters are downloaded to an ASCII File, NetLink II will send
the parameters that are displayed by the status screens. NetLink II offers
two different methods for saving parameters to an ASCII file; the Menu
Driven Method and the Command Driven Method.
14.2.1. Saving Parameters to an ASCII File
(Menu Driven Method)
This method uses NetLink's menu system to initiate the download.
1. Set your communications program (e.g., Tera Term) to receive an
ASCII text file and specify a file name for the saved parameters.
a) When using ProComm, press [Page Down] to activate the
"Receive Parameters" mode. Select "Raw ASCII". Type in a
filename for the saved parameters and press [Enter].
2. Access the NetLink II Command Mode as described in
Section 17.1.
3. Download NetLink's parameter settings to an ASCII file.
a) From the NetLink II Main Menu, type 3 and press [Enter], the
System Functions menu will appear as shown in Figure 14.1.
b) When the System Functions menu appears, type 5 and press
[Enter] to begin the download. NetLink II will send parameters
to the polling device, where they will be saved to the ASCII
filename selected in Step 1.
c) Invoke the appropriate command to exit from your
communication program's Receive Parameters Mode.
14.2.2. Saving Parameters to an ASCII File
(Command Driven Method)
NetLink II parameters can also be saved to an ASCII file using Command
^B99. Command ^B99 performs the same task as the System Function
Menu's "Download Parameters" function.
To save parameters to an ASCII file using the Command Driven Method,
proceed as follows:
1. Set your communications program (e.g., Tera Term) to receive an
ASCII text file and specify a file name for the saved parameters.
a) When using ProComm, press [Page Down] to activate the
"Receive Parameters" mode. Select "Raw ASCII". Type in a
filename for the saved parameters and press [Enter].
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com