Loading...
12-4
PollCat NetLink II - User’s Guide
12.2.4. Numeric Page
When "Numeric Page" is selected, NetLink II will contact one numeric
pager at a user defined number.
Note: Modem Port communications parameters must be properly
defined as described in Section 5.4.4.
The following item must be defined at the configuration menu for the
specified alarm:
Phone Number: Enter the number for your numeric pager.
Note: For Numeric Paging, the Phone Number prompt can specify
both the Pager phone number and a numeric "message". The phone
number and message are entered in the following format:
PHONENO@MESSAGENO#
Where PHONENO is the pager phone number, and MESSAGENO
is any number that will notify the user when an alarm occurs. For
example, to dial 555-1212 and send the message "321", the phone
number would be defined as "5551212@321#".
12.2.5. SNMP Trap
If this option is selected, NetLink II will send an SNMP Trap to a user-
defined IP address when an alarm is generated. The SNMP Trap can also
include an alarm message.
Note: Network Port parameters must first be properly defined as
described in Section 5.4.5. Make certain to specify IP Addresses for
the SNMP Manager(s) that will receive the trap.
When the SNMP Trap action is selected, the following items must be
defined at the configuration menu for the specified alarm:
SNMP Management: Select one, both or none of the defined SNMP
Managers. Note that IP addresses are defined via the Network Port
configuration menu.
Message: (Optional) Enter a message to describe the type of alarm
event that occurred; for example "CHECK PBX".
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com