Loading...
12-1
12. Alarm Actions
When an alarm is generated, NetLink II can call a modem or pager, send
an SNMP Trap, send an email message, or contact the user via the Console
Port. These tasks are referred to as "Alarm Actions".
The Alarm Actions discussed in this chapter can be applied to Toll Fraud
Alarms, PBX Inactivity Alarms, or the 80% Full Alarm. In addition,
NetLink II can also perform these Alarm Actions according to a user-
defined schedule, as described in Section 13.
The configuration menu for each individual alarm is used to select the
specific action that will be performed when the alarm is triggered. The
alarm configuration menus offer the following Alarm Actions:
None: When an alarm is generated, NetLink II will not attempt to
contact the user. Call records will continue to be flagged, counted
and sorted.
Callout: When an alarm is generated, NetLink II will call a user-
specified modem number in order to download data or report
conditions.
Alphanumeric Page: When an alarm is generated, NetLink II will
dial up to three alphanumeric pagers.
Numeric Page: When an alarm is generated, NetLink II will dial one
numeric pager.
SNMP Trap: When an alarm is generated, NetLink II will send an
SNMP Trap to the selected SNMP manager.
Email / Text Message: When an alarm is generated, NetLink II will
send an email or text message to a user-defined address.
Console: When an alarm is generated, NetLink II will contact the
device connected to the Console Port in order to download data or
report conditions.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com