PollCat NetLink II - User’s Guide
26. SNMP Management: The network manager that will receive SNMP
Traps generated by this alarm. This item selects one, both or none
of the two available SNMP Managers. IP Addresses for these SNMP
Managers are defined via the Network Port Configuration Menu.
27. Email/Message To: The email address(es) that will receive email and
text messages generated by this alarm when the Email /Text Message
Alarm action is selected. This item can select either or both of the two
user-defined email addresses, which are defined via the Network Port
Configuration Menu, Item 38 (Section 5.4.5.)
28. Message: The message that is sent when a Callout, Alphanumeric
Page, SNMP Trap, Email Action or Console Action is generated.
29. Auto Execute: If enabled, NetLink II will execute the command
string defined under item 30 when a Callout or Console action is
generated by this alarm.
30. Execute Commands: The Auto-Execute command string. This
command string consists of a series of ^Bxx commands with each
command separated by a backslash and forward slash character
(e.g., \/03\/01). ^Bxx commands are discussed further in
Section 17. For more information, please refer to the example in
Section 12.3. (Up to 64 characters; Default = undefined.)
Note: In order for Auto Execute to function, item 29 must be
enabled, the command string must be defined, and either a Callout
or Console action must be selected.
1. 80% Full Alarm: Off 21. Action: None
22. Phone #: (undefined)
23. Pager ID 1: (undefined)
24. Pager ID 2: (undefined)
25. Pager ID 3: (undefined)
26. SNMP Mgmt: Manager #1
27. Email/Msg To: #1
28. Message: (undefined)
29. Auto Execute: Off
30. Execute Cmds: (undefined)
Enter selection,
Press <ESC> to return to previous menu ...
Figure 11.1: The 80% Full Alarm Configuration Menu
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com