Loading...
9-11
The Alarm Filters (Toll Fraud Detection)
Action Parameters (Items 21 - 31): These items determine how
NetLink II will react when the counter for this clue exceeds the
threshold value. If default Alarm Filter Action parameters have been
defined (Section 9.2.1) each prompt will be configured according to the
default. Action Parameters for each Clue can be individually defined,
and parameters specified by defaults can also be edited. This allows
you to assign different Pager Numbers and etc. to each clue. For more
information, please refer to Section 12.
9.5.2. Editing and Deleting Clues
The Alarm Filter Configuration menu is used to edit, delete or display
parameters defined for each clue.
1. From the Main Menu, type 25 and press [Enter]. The Alarm
Configuration Menu will be displayed.
2. From the Alarm Configuration Menu, type 1 (for Alarm Filter 1)
or 2 (for Alarm Filter 2) and then press [Enter]. The Alarm Filter
Configuration Menu (Figure 9.2) will be displayed.
3. Display Clue Details: To review parameters assigned to each clue,
type 2 and press [Enter]. NetLink II will list all clue names for this
Alarm Filter. Key in the name of the desired clue and press [Enter];
parameters for the specified clue will be displayed.
4. Edit Clues: To alter an existing Clue, type 4 and press [Enter].
NetLink II will list all clues defined for this Alarm Filter. Key in the
name of the desired clue and then press [Enter]. The Define/Edit Clue
menu will be displayed.
5. Delete Clues: To delete an existing Clue, type 5 and press [Enter].
NetLink II will list all clues defined for this Alarm Filter. Key in the
name of the clue that you wish to delete and then press [Enter]. The
clue will be deleted.
Note: Deleted Alarm Clues cannot be recovered.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com