1. MIC INPUT JACK FOR INPUT 1 (6.3ø Phone Jack, Balanced)
This input allow you to connect balanced 6.3ø Phone Jack plugs.
If this input is connected, Turn the inputting signal to INPUT 1 on the rear panel off.
2. INPUT SIGNAL LED
The SIGNAL LED is lighting by input signal of INPUT 1~3.
3. INPUT VOLUME
These knobs control the volume level of INPUT 1~3.
4. TONE CONTROL
These knobs provide continuous control of the high (10kHz) and low (100Hz) frequency response, by
adding up to 10dB of cut (decrease) or boost (increase).
5. MASTER VOLUME LEVEL
This knob provides continuous control of the controlled overall signal level by each volume.
6. POWER LED
Display the power ON/OFF.
7. POWER SWITCH (PUSH TYPE)
Pressing the power switch turns the unit on. Pressing it again turns off.
* This switch makes up that one pole be cut off when power is off.