Loading...
DIGITAL AMPLIFIER
14 MA-110/110N
Specifications
Specifications
MA-110 MA-110N
Rated Output Power 100W
Speaker Output Power / Impedance 20V/4, 70V/49, 100V/100
Input Sensitivity / INPUT 1 -50dBV / 2k
Impedance INPUT 2(MIC) -50dBV / 2k
INPUT 2(LINE) -10dBV / 20k
INPUT 3 -10dBV / 10k
TEL IN 0.775 / 10k
Frequency Response (@ 1W, 4) 80Hz ~ 18kHz
T.H.D (at 1kHz Rated Output) Less than 1% at 100W(with AES-17 filter)
S/N INPUT 1,2 Better than 60dB
INPUT 3, TEL IN Better than 70dB
Tone Control BASS (100Hz) ±10dB
TREBLE (10kHz) ±10dB
Operating Temperature -10°C ~ +40°C
Power Source 100–120VAC or 220–240VAC, 50/60Hz
(Supplied AC mains depends on country requirements)
Power Consumption 30W
Weight 3.05kg/6.7lb
Dimensions 300(W) x 44(H) x 230(D)mm/11.8(H) x 1.7(H) x 9.1(D)in
* Design and specification are subject to be changed for the improvement of product quality without pre notice.
Remark: 1. All specifications are measured with AES-17 filter.
2. This sytem is used digital Amplifier (PWM Modulation) so the PWM leakage signal will appear to
output terminal, but it doesn’t matter. You can’t hear the PWM leakage sound because of PWM
frequencies is very higher than Audio frequencies.
* 0dBV = 1.0Vrms
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com