Here’s how to change the Advanced Setup settings.
Example: Intelli volume setting procedure
With Intelli Volume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use the arrow / buttons to set the level.
If a component is noticeably louder than the others, use
the arrow  button to reduce its input level. If it’s
noticeably quieter, use the arrow  button to increase
its input level. The input level can be adjusted from
–12 dB to +12 dB in 1 dB steps.
1Turn on the power.
2Press the [SETUP] button on the remote
The setup menu appears in the display.
3Use the arrow / buttons to select
“1. Source Setup,” and then press [ENTER].
The Hardware setup menu appears in the display.
4Use the arrow / buttons to select
“Intelli Volume: 0 dB”.
5Change the Intelli volume to “–2 dB” using
the arrow / buttons.
6Press the [SETUP] button on the remote
controller to complete the setting.
• This procedure can also be performed on the receiver
by using [SETUP], TUNING /, PRESET /
, and [ENTER].
• Press [RETURN] to return to the previous menu.
Changing the Advanced Setup