Loading...
6-3
The Status Screens
Status: The connect status for each port.
When the port is connected, this column will list the number of the
other port connected to this port. If the column contains an asterisk,
this indicates the port has accessed command mode.
If the connected port is listed as "Nn" (where "n" is a number), this
indicates that the RS232 port is connected to the Network port. The
numbers indicate which of the available Telnet sessions is being used
(for example, "C-06".)
Baud: The baud rate selected for each port.
COM: The Data Bits, Parity, and Stop Bits selected for each port. For
example, "8N1" indicates Eight data bits, No parity, and One stop bit.
HS: The handshaking (flow control) mode for each port.
Mode: The user-selected Port Mode.
BUF: The amount of data (in bytes) currently stored in the buffer for this
port.
CTS: The High/Low status of the CTS line at the RS232 interface.
PORT DIAGNOSTICS:
Site ID: (undefined) 06/03/2006 00:34:51 GMT (GMT+0000)
PORT | NAME | STATUS | BAUD | COM | HS | MODE | BUF | CTS
-----+------------------+--------+--------+-----+------+--------+-------+----
01 | (undefined) | Free | 9600 | 8N1 | RTS | Any | 0 | H
02 | (undefined) | Free | 9600 | 8N1 | RTS | Any | 0 | L
03 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
04 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
05 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
06 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
07 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
08 | (undefined) | Free | 9600 | 8N1 | RTS | Pass | 0 | L
09 | MODEM | Free | 57.6K | 8N1 | RTS | Modem | 0 | H
Enter /H for command menu.
RSM>
Figure 6.2: Port Diagnostics Screen (RSM-8 Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com