Loading...
Apx-1
A. RS232 Port Interface
Figure A.1: RS232 Port Interface
DCD and DTR hardware lines function as follows:
1. When connected:
a) If either port is set for Modem Mode, the DTR output at either port
reflects the DCD input at the other end.
b) If neither port is set for Modem Mode, DTR output is held high
(active).
2. When not connected:
a) If the port is set for Modem Mode, upon disconnect DTR output is
pulsed for 0.5 seconds and then held high.
b) If the port is not set for Modem Mode, DTR output is controlled by
the DTR Output option (Serial Port Parameters Menu, Option 23).
Upon disconnect, Option 23 allows DTR output to be held low, held
high, or pulsed for 0.5 seconds and then held high.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com