Loading...
13-5
Command Reference Guide
/D Third Party Disconnect
Invoke the /D command at your resident port to disconnect two other ports.
Note that the /D command cannot disconnect your resident port.
Availability: Supervisor Only
Format: /D[/Y] <x> [x] [Enter]
Where:
/Y (Optional) suppresses the "Sure?" prompt.
x Is the number or name of the port(s) to be disconnected.
To disconnect all ports, enter an asterisk. To disconnect a
Telnet session, enter the "Nn" format Network Port Number.
Response:
Verbose: "Are you Sure (y/n)?", if Y, unit will respond with
"Disconnected".
Terse: 5, if Y, unit will respond with 3.
Example: To disconnect Port 2 from Port 3 without the "Sure?" prompt,
access the Command Mode from a third port with Supervisor Level command
capability and type:
/D/Y 2 [Enter] or /D/Y 3 [Enter]
/E Erase Buffer
Erases data from the buffer for a speciļ¬ed port(s). Note that erased data cannot
be recovered.
Availability: Supervisor / Non-Supervisor
Format: /E[/Y] <x> [x] [Enter]
Where:
x Is the number or name of the port buffer(s) to be cleared.
To erase buffers for all ports, enter an asterisk.
/Y (Optional) Suppresses the "SURE? (Y/N)" prompt.
Response:
Verbose: "Are You Sure (y/n)?", if Y, unit responds with "OK".
Terse: 5, if Y, the unit will respond with 0.
Example: To clear the buffer for Port 3, access the Command Mode from
a port and account that permit Supervisor commands, and
type /E 3 [Enter].
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com