Loading...
6. To turn off one or more speaker pairs, simply press the
corresponding on/off button(s) on the speaker selector.
Refer to the protection chart for the correct setting of the
Protection button.
Constant Protection Switch
The HPS-4/HPS-6 is equipped with a manual override for the
protection circuit that enables you to defeat the front panel
protection switch and maintain constant impedance protec-
tion. This will safeguard your amplifier from being overdriven
due to accidental or improper use by anyone unfamiliar with
the equipment.
To engage this override, move the rear panel “Constant
Protection” switch to the “On” position. Constant imped-
ance protection will be maintained until the switch is turned
to “Off”.
13
H
IGH
P
OWER
S
PEAKER
S
ELECTION
S
YSTEM
Features and Benefits
The HPS-4 and HPS-6 offer a number of improvements over
other speaker selectors:
Power handling: 250 watts per channel RMS
Protection circuit safeguards receiver/amplifier
Separate left and right ground paths for compatibility with
all amplifiers
Rear-panel switch for constant or selectable impedance
protection
Removable connectors accommodate up to 12 gauge wire
Rugged all metal chassis construction
Non-skid feet won’t scratch furniture and ensure unit stability
during operation
72 adhesive-backed room identification labels
Requires an amplifier that is compatible with a 4 ohm load
Warranty: Ten-year limited
Dimensions: 17" wide x 2" high x 8-5/8" deep
Shipping weight: approximately 7 lbs
2
H
IGH
P
OWER
S
PEAKER
S
ELECTION
S
YSTEM
TECH
SUPPORT
HOTLINE
If you have questions
regarding the opera-
tion of the Niles HPS
series, contact your
local Niles dealer
or Niles Technical
Support at
1-800-289-4434.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com