3.2. Power Connection
The Master Power Switch located on the back panel of the unit applies AC Power to the RPB-
115. The Master Power Switch must be ON in order for the RPB-115 to operate. Each time
that the RPB-115 is powered ON, the five AC outlets will all be set in the ON condition.
Each AC outlet is capable of switching up to 5 Amps of AC power. The total for all 5 outlets
cannot exceed 10 Amps.
Figure 4 below summarizes the cable layout for a typical RPB-115 installation.
RPB-115 - Remote Power Boot Switch , User's Guide Installation
Figure 4 : RPB-115 Cable Layout