Loading...
6-49
Configuration Options
6.8.9. RADIUS Parameters
In the Text Interface, the RADIUS Parameters menu is accessed via the Network
Configuration menu (/N for IPv4 parameters or /N6 for IPv6 parameters.) In the Web
Browser Interface, both IPv4 and IPv6 parameters are defined via a single RADIUS
Parameters menu, which is accessed via the flyout menus under the Network
Configuration link. The RADIUS Configuration Menus offer the following options:
• Enable:Enables/DisablestheRADIUSfeatureattheNetworkPort.(Default=Off)
• PrimaryHost: Defines the IP address or domain name for your primary RADIUS
server.(Default=undefined)
• PrimarySecretWord: Defines the RADIUS Secret Word for the primary RADIUS
server.(Default=undefined)
• SecondaryHost: Defines the IP address or domain name for your secondary,
fallbackRADIUSserver.(Default=undefined)
• SecondarySecretWord: Defines the RADIUS Secret Word for the secondary
RADIUSserver.(Default=undefined)
• FallbackTimer: Determines how long the RPC will continue to attempt to contact
the primary RADIUS Server before falling back to the secondary RADIUS Server.
(Default=3Seconds)
• FallbackLocal: Determines whether or not the RPC will fallback to its own
password/username directory when an authentication attempt fails. When enabled,
the RPC will first attempt to authenticate the password by checking the RADIUS
Server; if this fails, the RPC will then attempt to authenticate the password by
checking its own internal username directory. This parameter offers three options:
Off: Fallback Local is disabled (Default.)
On(AllFailures): Fallback Local is enabled, and the unit will fallback to its
own internal user directory when it cannot contact the Radius Server, or when a
password or username does not match the Radius Server.
On(TransportFailure): Fallback Local is enabled, but the unit will only fallback
to its own internal user directory when it cannot contact the Radius Server.
• Retries: Determines how many times the RPC will attempt to contact the RADIUS
server. Note that the retries parameter applies to both the Primary RADIUS Server
andtheSecondaryRADIUSServer.(Default=3)
• AuthenticationPort: The Authentication Port number for the RADIUS function.
(Default=1812)
• AccountingPort: The Accounting Port number for the RADIUS function.
(Default=1813)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com