Loading...
6-12
Configuration Options
• CallbackAttempts: The number of times that the RPC will attempt to contact the
Callbacknumber.(Default=3attempts.)
• CallbackDelay: The amount of time that the RPC will wait between Callback
attempts.(Default=30seconds.)
Notes:
• AfterconfiguringandenablingCallbackSecurity,youmustthendefinea
callbackphonenumberforeachdesireduseraccount(asdescribedin
Section6.5)inorderforthisfeaturetofunctionproperly.
• Whenusingthe"On-Callback(WithPasswordPrompt)"option,itis
importanttorememberthataccountsthatdonotincludeacallbacknumber
willbeallowedtoaccesscommandmodewithoutcallbackverification.
6.2.5. Scripting Options
The Scripting Options submenu provides access to parameters that are used to set up
the RPC unit for running various scripts.
Notes:
• ToaccessScriptingOptionsparametersviatheTextInterface,firsttype/F
and press [Enter]todisplaytheSystemParametersMenu,thenkeyinthe
numberfortheScriptingOptionsitemandpress[Enter].
• ToaccesstheScriptingOptionsparametersviatheWebBrowserInterface,
placethecursoroverthe"GeneralParameters"link,waitfortheflyoutmenu
toappear,thenclickonthe"ScriptingOptions"link.
The Scripting Options menu allows the following parameters to be defined:
• CommandConfirmation: Enables/Disables the Command Confirmation feature.
When enabled, a "Sure" prompt will be displayed before power switching and
reboot commands are executed. When disabled, commands will be executed
withoutfurtherprompting.(Default=On.)
• AutomatedMode: When enabled, the RPC will execute switching and reboot
commands without displaying a confirmation prompt, status screen or confirmation
messages.Formoreinformation,pleaserefertoSection6.2.5.1.(Default=Off.)
Note:WhentheAutomatedModeisenabled,securityfunctionsare
suppressed,andusersareabletoaccessconfigurationmenusandcontrol
circuitswithoutenteringapassword.IfsecurityisaconcernandtheAutomated
Modeisrequired,itisrecommendedtousetheIPTablesfeature(Section6.8.2)
to restrict access.
• CommandPrompt: Allows the Text Interface command prompt to be set to either
MPC,IPS,NPS,NBB,VMR,CCM,RPCorthecurrentsiteID.(Default=RPC.)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com