Loading...
6-6
Configuration Options
• SecondaryNTPAddress: Defines the IP address or domain name (up to 64
characterslong)forthesecondary,fallbackNTPServer.(Default=undefined.)
Notes:
• Inordertousedomainnamesforwebaddresses,DNSServerparameters
mustfirstbedefinedasdescribedinSection6.8.4.
• TheWebBrowserInterfaceincludestwoseparatefieldsthatareallowedto
definebothanIPv4protocolandIPv6protocolformatPrimaryNTPAddress
andSecondaryNTPAddress.
• TheRPCallowsparametersforbothIPv4andIPv6protocolstobedefined
and saved.
• NTPTimeout: The amount of time in seconds, that will elapse between each
attempt to contact the NTP server. When the initial attempt is unsuccessful, the
RPC will retry the connection four times. If neither the primary nor secondary NTP
server responds, the RPC will wait 24 hours before attempting to contact the NTP
serveragain.(Default=3Seconds.)
• TestNTPServers: Allows you to ping the IP addresses or domain names defined
via the Primary and Secondary NTP Address prompts, or to ping a new address or
domain defined via the Test NTP Servers submenu in order to check that a valid IP
address or domain name has been entered.
Notes:
• InorderfortheTestNTPServersfeaturetofunction,yournetworkand/or
firewallmustbeconfiguredtoallowpingcommands.
• InadditiontotheTestNTPServersoption,the/TESTcommandintheText
Interfaceorthe"Test"optionintheWebBrowserInterfacecanalsobeused
topinganyuserdefinedIPaddressinordertomakecertainthattheIP
addressisresponding.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com