Loading...
6-2
Configuration Options
6.2. Defining System Parameters
The System Parameters menus are used to define the Site ID Message, set the system
clock and calendar, and configure the Invalid Access Lockout feature and Callback
feature.
To access the System Parameters menu via the Text Interface, type /F and press
[Enter]. To access the System Parameters menu via the Web Browser Interface, place
the cursor over the "General Parameters" link, wait for the flyout menu to appear and
then click on the "System Parameters" link. The System Parameters Menus are used to
define the following:
• UserDirectory: This function is used to view, add, modify and delete user
accounts and passwords. As discussed in Section 6.4 and Section 6.5, the User
Directory allows you to set the security level for each account as well as determine
which circuits each account will be allowed to control.
Note:The"UserDirectory"optiondoesnotappearintheWebBrowser
Interface’sSystemParametersmenu,andisinstead,accessedviathe"User
Configuration"linkonthelefthandsideofthemenu.
• SiteID: A text field, generally used to note the installation site or name for the RPC
unit.(Upto64characters;Default=undefined)
Notes:
• TheSiteI.D.willbeclearediftheRPCisresettodefaultsettings.
• WhenviewedviatheTextInterface(CLI)SiteI.D.messagesthatareover30
characterslongwillbetruncated.TodisplaytheentireSiteI.D.messagevia
theTextInterface,type/J* and press [Enter]
• RealTimeClock: This prompt provides access to the Real Time Clock menu,
which is used to set the clock and calendar, and to enable and configure the NTP
(Network Time Protocol) feature as described in Section 6.2.1.
Note:The"RealTimeClock"optiondoesnotappearintheWebBrowser
Interface’sSystemParametersmenu,andisinstead,accessedviathe"Real
TimeClock"linkintheGeneralParametersfly-outmenu.
• InvalidAccessLockout: If desired, this feature can be used to temporarily disable
Console Port access, SSH access, Telnet access and/or Web access to the
RPC command mode after a user specified number of unsuccessful login attempts
aremade.Formoreinformation,pleaserefertoSection6.2.2.(Default=Off)
Note:The"InvalidAccessLockout"itemdoesnotappearintheWebBrowser
Interface’sSystemParametersmenu,andisinstead,accessedviathelinkinthe
GeneralParametersfly-outmenu.
• TemperatureFormat: Determines whether the temperature is displayed as
FahrenheitorCelsius.(Default=Fahrenheit.)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com