3.2.3. Output Terminal Fuses
Note that each output terminal includes four fuses; one for each circuit on the output
terminal. If a fuse is blown, a red dot will appear in the clear cap as shown in Figure 3.3.
To remove a fuse, use a pair of pliers to grasp the black body of the fuse, and then
gently pull the fuse loose from the RPC-40L8A4 unit. The RPC-40L8A4 ships with 10
Amp fuses; for custom fuses, please contact WTI.
Clear Cap Red Dot
Figure 3.3: DC Output Terminal Block Fuses (RPC-40L8A4 Series Units Only)