Loading...
17-7
Command Reference Guide
/BOOT Initiate Boot Cycle
Initiates a boot cycle at the selected circuit(s) or Circuit Group(s). When a Boot cycle is
performed, the RPC will first switch the selected circuit(s) Off, then pause for the user-
defined Boot/Sequence Delay Period, then switch the circuit(s) back on. The /BOOT
command can also be entered as /BO.
Notes:
• WhenthiscommandisinvokedinAdministratorModeorSuperUserMode,it
canbeappliedtoallRPCcircuitsandCircuitGroups.Whenthiscommand
isinvokedinUserMode,itcanonlybeappliedtothecircuitsand/orCircuit
Groupsthathavebeenenabledfortheaccount.
• Whenthe/BOOTcommandisusedtorebootmorethanoneplug,theBoot/
SequenceDelayPeriodswillbeappliedasdescribedinSection6.6.
Availability: Administrator, SuperUser, User
Format: /BOOT <s>[,Y] [Enter] or /BO <s> [Enter]
Where:
s The number or name of the circuit(s) or Circuit Group(s) that you intend to
boot. To apply the command to several circuits, enter a plus sign (+)
between each circuit number. To apply the command to a range of
circuits, enter the numbers for the first and last circuits in the range,
separated by a colon character (:). To apply the command to all circuits
allowed by your account, enter an asterisk character (*).
,Y (Optional) Suppresses the command confirmation prompt.
Example:
Assume that your account allows access to Circuit A2 and Circuit A3. To initiate a boot
cycle at Circuits A2 and A3, without displaying the optional command confirmation
prompt, invoke either of the following command lines:
/BOOT A2+A3,Y [Enter] or /BO A2+A3,Y [Enter]
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com