Loading...
17-6
Command Reference Guide
/J Display Site ID / Unit Information
Displays the user-defined Site I.D. message. If the optional asterisk (*) argument is
included in the command line, the command will also show model numbers, serial
number, software versions and other information for the RPC unit.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /J [*] [Enter]
Where * (asterisk) is an optional command argument, that is used to display the
model number, software version and other information for the RPC unit.
/C Connect to Serial Port
When the RJ-45 Console Port has been configured as a Normal Mode Port as described
in Section 6.7, the /C command can be used to create a connection between the
Network port and the Console Port.
Notes:
• UserlevelaccountscanonlyconnecttotheConsolePortwhenserialport
access is specifically permitted by the account.
• Toterminateaportconnection,eithertype^X([Ctrl] plus [X])orinvokethe
currentlydefineddisconnectsequence.
Availability: Administrator, SuperUser, User
Format: /C 1 [Enter]
17.3.2. Control Commands
/X Exit Command Mode
Exits command mode. When issued at the Network Port, also ends the Telnet session.
Note:Ifthe/Xcommandisinvokedfromwithinaconfigurationmenu,recently
definedparametersmaynotbesaved.Inordertomakecertainthatparameters
are saved, always press the [Esc]keytoexitfromallconfigurationmenusand
thenwaituntil"SavingConfiguration"messagehasbeendisplayedandthe
cursorhasreturnedtothecommandpromptbeforeissuingthe/Xcommand.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /X [Enter]
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com