Loading...
15-3
Saving and Restoring Configuration Parameters
15.3. Restoring Previously Saved Parameters
If you make a mistake while configuring the RPC unit, and wish to return to the
previously saved parameters, the Text Interface's "Reboot System" command (/I)
offers the option to reinitialize the RPC unit using previously backed up parameters.
This allows you to reset the unit to previously saved parameters, even after you have
changed parameters and saved them.
Notes:
• TheRPCwillautomaticallybackupsavedparametersonceaday,shortlyafter
Midnight.Thisconfigurationbackupfilewillcontainonlythemostrecently
savedRPCparameters,andwillbeoverwrittenbythenextnight'sdaily
backup.
• Whenthe/Icommandisinvoked,asubmenuwillbedisplayedwhichoffers
severalRebootoptions.Option5isusedtorestoretheconfigurationbackup
file.Thedateshownnexttooption5indicatesthedatethatyoulastchanged
and saved unit parameters.
• Ifthedailyautomaticconfigurationbackuphasbeentriggeredsincethe
configurationerrorwasmade,andthepreviouslysavedconfigurationhas
been overwritten by newer, incorrect parameters, then this function will not
beabletorestorethepreviouslysaved(correct)parameters.
To restore the previously saved configuration, proceed as follows:
1. Access command mode via the Text Interface, using a username/password that
permits access to Administrator level commands (see Section 5.1.2.)
2. At the RPC command prompt, type /I and press [Enter]. The RPC will display a
submenu that offers several different reboot options.
3. At the submenu, you may choose Item 5 (Reboot & Restore Last Known Working
Configuration.) Type 5 and press [Enter].
Note:Wheninvokingthe/Icommandtorestoreconfigurationparameters,
Item5isrecommended.
4. The RPC will reboot and previously saved parameters will be restored.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com