Loading...
2-3
Unit Description
2.3. Front Panel Components - RPC-40L8A4 Series
As shown in Figure 2.3, the RPC-40L8A4 Series Front Panel includes the following:
Note: All Reset and Default button functions can also be disabled via the
System Parameters menu, as described in Section 6.2.
NetworkPort: An RJ45 Ethernet port for connection to your 10/100Base-T, TCP/IP
network. Note that the RPC features a default IP address (192.168.168.168). This
allows you to connect to the unit without first assigning an IP address. Note that the
Network Port also includes two, small LED indicators for Link and Data Activity. For
more information on Network Port configuration, please refer to Section 6.8.
ConsolePort: A DB9, RS232 serial port (DTE), for connection to a local terminal or
external modem, as described in Section 4.5.
ONIndicator: Lights when power is applied to the Control Section.
RDYIndicator: Flashes when the RPC is ready to receive commands.
DefaultButton: Toggles circuits On/Off or resets unit to factory default parameters
as described in Section 2.5.
ResetButton: Reboots and/or resets the RPC to factory defaults as described in
Section 2.5.
CircuitStatusIndicators: A series of eight LED indicators, which light when power
to the corresponding circuit is Switched On.
AlarmInputIndicators: A series of four LED indicators which light when the
corresponding Alarm Input has generated an alarm. For more information on Alarm
Input functions, please refer to Section 8.7.
ALARM INPUT
DEFAULT RESET
ON RDY
OUTPUT STATUS
1 2 3 4
A1 A2 A3 A4 B1 B2 B3 B4 www.wti.com
RPC
Remote Power Controller
Ethernet 10/100 PHONE
ACT LINK
1234 5 6 7 8
Figure 2.3: Front Panel (Model RPC-40L8A4 Shown)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com