2.2. Back Panel Components - RPC-4850 Series
As shown in Figure 2.2, the RPC-4850 Series back panel includes the following:
Note: All Reset and Default button functions can also be disabled via the
System Parameters menu, as described in Section 6.2.
DefaultButton: Toggles circuits On/Off or resets unit to factory default parameters
as described in Section 2.5.
ResetButton: Reboots and/or resets the RPC to factory defaults as described in
NetworkPort: An RJ45 Ethernet port for connection to your 10/100Base-T, TCP/IP
network. Note that the RPC features a default IP address (192.168.168.168). This
allows you to connect to the unit without first assigning an IP address. Note that the
Network Port also includes two, small LED indicators for Link and Data Activity. For
more information on Network Port configuration, please refer to Section 6.8.
ConsolePort: A DB9, RS232 serial port (DTE), for connection to a local terminal or
external modem, as described in Section 4.5.
RDYIndicator: (Ready) Flashes to indicate that unit is ready to receive commands.
SwitchedOutputCircuits: A series of eight DC, 15 Amp circuits divided into two
A. 15AmpCircuitBreakers: Each circuit includes a 15 Amp breaker.
B. StatusIndicators: Each circuit includes a Status Indicator, which lights when
the circuit is switched On.
C. MountingScrewReceptacles: Each terminal block includes two mounting
screw receptacles, which are used to install the protective cover (not shown.)
PowerInput: Two DC input Buses.
D. 50AmpCircuitBreakers: Each power input bus includes a 50 Amp breaker.
E. MountingScrewReceptacles: The power input terminal block includes two
mounting screw receptacles, which are used to install the protective cover (not
15 15 15 15 15 15 15 15
10/100BaseT RDY CKT
1 2 3 4 5 6 7 8
BUS A BUS B
Ø -48 Ø Ø Ø Ø Ø Ø Ø -48 -48 -48 -48 -48 -48 -48
-48 -48 Ø Ø
1 2 3 4 5 6 7 8
Figure 2.2: Back Panel (Model RPC-4850-48V Shown)