Loading...
8-13
Alarm Configuration
• ResendDelay: Determines how long the RPC will wait to resend an email
message generated by this alarm, when the initial attempt to send the notification
wasunsuccessful.(Default=60Minutes.)
• NotifyUponClear: When this item is enabled, the RPC will send additional
notification when the situation that caused the alarm has been corrected. For
example, when Notify Upon Clear is enabled, the RPC will send initial notification
when it detects that an Invalid Access Lockout has occurred, and then send a
second notification when it determines that the port has been unlocked.
(Default=On.)
• EmailMessage:Enables/Disablesemailnotificationforthisalarm.(Default=On.)
• Address1,2,and3: These parameters are used to select which of the three email
addresses defined via the "Email Messages" menu (see Section 6.8.10) will receive
the email alarm notification messages generated by this alarm. The Address
parameters can be used to select one, or any combination of the addresses defined
viatheEmailMessagesmenu.(Default=AllOn.)
Note:IfEmailaddresseshavebeenpreviouslyspecified,thenthetextunder
the parameters will list the current, user defined email addresses.
• Subject: This parameter is used to define the text that will appear in the "Subject"
fieldforallemailnotificationmessagesgeneratedbythisalarm.(Default="Alarm:
Invalid Access Lockout")
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com