Loading...
/UF Upgrade Firmware
When new versions of the CMS operating firmware become
available, this command is used to update the existing firmware
as described in Section 10. Note that this command will only
function at the Network Port and at Setup Ports One and Two.
Availability: Supervisor Only
Format: /UF [Enter]
Response: The CMS will display a menu which offers the
options to retain existing CMS parameters, default parameters, or
abort the upgrade procedure.
/W Display Port Parameters (Who)
Displays configuration of an individual port, but does not allow
the user to change parameters. Ports with User Level command
capability cannot display parameters for other ports. Normally,
the Port Parameters screen will not include the Port Password.
Note however, that when the Supervisor Mode is active, the /WP
option can be used to display the password for the target port.
For more information, please refer to Section 6.4.
Availability: Supervisor / User
Format: /W[P] [x] [Enter]
Where:
PWhen the “P” option is included (e.g. /WP 5), the Port
Parameters screen will list the password for each port, if
defined. Note that the Supervisor Password will not be
displayed. (Supervisor Mode Only).
xIs the port number or name. To display parameters for
the Network Port, enter an “N”. If the "x" argument is
omitted, parameters for your resident port will
be displayed.
Note: In Port (User) Mode only, if the /W command
is applied to the Network Port, the Port Parameters
Screen will only list the setting for the Sequence
Disconnect, the selected Logoff Character, and the
status of the Accept Break option.
Response: Displays port parameters.
Example: To display parameters for a port named "SERVER",
access the Command Mode from a port with Supervisor Level
command capability, and type /W SERVER [Enter].
11-11
Command Reference Guide
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com